User Tools

Site Tools


student_documentation:intro:jm3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
student_documentation:intro:jm3 [2019/04/04 02:02]
Christoph Zingg [Handling]
student_documentation:intro:jm3 [2019/04/04 02:03] (current)
Christoph Zingg [Handling]
Line 66: Line 66:
 If the device is only being swiched on when your vehicle is on track, the battery will last for the whole event. If it needs charging make shure your JM3 and your OBC system (Pod) are both off. If the device is only being swiched on when your vehicle is on track, the battery will last for the whole event. If it needs charging make shure your JM3 and your OBC system (Pod) are both off.
 Then connect the USB mini cable to any USB outlet able to deliver more than 1A of current, plug the other end to the JM3 and switch the Joulmeter on.\\ Then connect the USB mini cable to any USB outlet able to deliver more than 1A of current, plug the other end to the JM3 and switch the Joulmeter on.\\
-Now charging begins, indicated by the flashing LED. When the flashing LED turns green, the battery is almost full. If you have the time, let the charger top off the battery for an additional hour. The unplug ​The USB an switch ​of the JM3.+Now charging begins, indicated by the flashing LED. When the flashing LED turns green, the battery is almost full. If you have the time, let the charger top off the battery for an additional hour. Then unplug USB and switch ​off the JM3. 
 Charging a fully depleted battery will take about 3 hours. ​ Charging a fully depleted battery will take about 3 hours. ​
student_documentation/intro/jm3.txt · Last modified: 2019/04/04 02:03 by Christoph Zingg