User Tools

Site Tools


student_documentation:intro:bb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
student_documentation:intro:bb [2019/04/02 05:40]
Christoph Zingg
student_documentation:intro:bb [2019/04/02 05:44] (current)
Christoph Zingg
Line 48: Line 48:
 Note, the battery and holder provided must only be connected to the OBC. Note, the battery and holder provided must only be connected to the OBC.
   ​   ​
-The pin labelled “E” can be connected to the common ground point in the car. It depends on the individual set up of each car, if this connection is helpful or not.+The pin labelled “E” can be connected to the common ground point in the vehicle. It depends on the individual set up of each vehicle, if this connection is helpful or not.
  
-The LEDs will not light up until the Pod is connected ​to the Backbone and switched on.+The LEDs will not light up when power is connected. The Backbone‘s electronics will be activated by the Pod during its startup process.
  
  
student_documentation/intro/bb.txt · Last modified: 2019/04/02 05:44 by Christoph Zingg