User Tools

Site Tools


faq:faq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
faq:faq [2018/03/06 01:01]
Corina Steffen
faq:faq [2019/04/03 03:22] (current)
Christoph Zingg [Telemetry System]
Line 1: Line 1:
 ====== Frequently Asked Questions ====== ====== Frequently Asked Questions ======
 +\\
  
-**Q: Where do we get brake fluid**\\ +===== Telemetry System ===== 
-A: E-Shop on site+  - **Q: How do we have to install the Joulemeter (input/​output)** 
 +    - A: See Pre-Event Installation or the Quickstartguide\\ ​\\ 
 +  - **Q: How to install the Liquid Flowmeter** 
 +    - A: See Pre-Event Installation or the Quickstartguide\\ \\ 
 +  - **Q: How can I see the battery status of the Joulemeter** 
 +    - A: Is shown on the display during Joulemeter power on in voltage (4.2V full / 3.7V need to charge)\\ \\ 
 +  - **Q: Will the data from the telemetry system be available to us?**  
 +    - A: Yes, teams receive an URL together with the telemetry equipment.\\ \\ 
 +  - **Q: Can we install a separate battery just for the telemtry system?**  
 +    - A: Not necessary, you receive a separate battery for the telemetry system.\\ \\ 
 +  - **Q: How to install the relays / kill switch?**  
 +    - A: Check Pre-Event Guide, Quickstart Guide\\ \\ 
 +  - **Q: Where to place the Joulemeter in ICE vehicles?**  
 +    - A: See installation guide on Student Portal (WIKI)\\ \\ 
 +  - **Q: Where to place the fuse in ICE vehicles?**  
 +    - A: See installation guide on Student Portal (WIKI)\\ \\ 
 +  - **Q: What does the LED status of the OBC/POD mean?**  
 +    - A: See Pre-Distribution Briefing. If there is an other pattern than described in the Pre-Distribution Briefing, see the Telemetry Team for further details.\\ \\
  
-**Q: Where do we get engine oil**\\ 
-A: Telemetry Distribution 
  
-**Q: How do we have to install ​the Joulemeter (input/​output) ​**\\ +===== Material ===== 
-ASee Pre-Event Installation or the Quickstartguide+  - **Q: Where do we get brake fluid** 
 +    - A: E-Shop on site\\ \\ 
 +  - **Q: Where do we get engine oil** 
 +    - A: Distribution desk\\ \\ 
 +  - **Q: Can we have a little bit of fuel to test the engine?**  
 +    - A: Go to fuel station at Technical Inspection\\ ​\\ 
 +  - **QWhere can I buy fuel tanks and tires?**  
 +    ​A: There is a Supply Shop at the Student Lounge\\ \\
  
-**Q: How to install the Liquid Flowmeter**\\ +===== Organisation===== 
-A: See Pre-Event Installation ​or the Quickstartguide+  - **Q: How to fill out the Technical Inspection Checklist (Selfcheck)?​** 
 +    - A: Teams fill out [YES] or [NO], the checklist is for the teams to know they are ready for inspection\\ \\ 
 +  - **Q: Do the main driver and backup driver have to do the inspection separate or can they go together?​** 
 +    - A: They should come together, both drivers need to be checked on safety belts and other items. ​ Only drivers which pass inspection with the vehicle are allowed to go on the track\\ \\ 
 +  - **Q: Our battery is not arrived yet, can we queue for the inspection without it and install ​it as soon as it arrives?​** 
 +    - A: No \\ \\ 
 +  - **Q: Do we need a red light starter?​** ​    
 +    - A: yes\\ \\  
 +  - **Q: Do we have to wear the yellow wests for the inspection? who has to wear it (driver, manager)?**  
 +    - A: No\\ \\ 
 +  - **Q: Is there a buggy tour for the drivers to see the track? When? Where?**  
 +    - A: No\\ \\ 
 +  ​**Q: How long is the Technical Inspection open?**  
 +    - A: Read in Handbook, check with Tech. Team Manager\\ \\ 
 +  - **Q: What happens with the cars at inspection ​or in the queue when the Technical Inspection is closing?**  
 +    - A: Team number will be noted, come back next morning or when Technical Inspection is reopened and inspection will go ahead\\ \\ 
 +  - **Q: Information about schedule, showers, infos, eating**  
 +    - A: Pit-Stop\\ \\ 
 +  - **Q: Where is the welding shop?**  
 +    - A: The welding shop is located in the fire station. ​ The fire station is located in the first building outside the tent. \\ \\ 
 +  - **Q: What tooling is allowed in the paddock?**  
 +    - A: Small tools like hand drilling machines ok, but no bigger ones or grinders (safety issue)\\ \\ 
 +  - **Q: I have lost my pre-event documents, how to get them?**  
 +    - A: QR-Codes\\ \\ 
 +  - **Q: Where to get the sticker that allows us to enter the track?**  
 +    - A: There are two stickers you need for the competition. ​ One is for safety and the other is technical. ​ Both are provided when you complete Tech Inspection. \\ \\ 
 +  - **Q: Can we go to trial races without the telemetry system?**  
 +    - A: No\\ \\
  
-**Q: How can I see the battery status of the Joulemeter**\\ 
-A: Is shown on the display in voltage (4.2V full / 3.2V almost empty) 
- 
-**Q: Do the main driver and spare driver have to do the inspection separate or can they go together?​**\\ ​ 
-A: They can come together, only the driver which passed the tests is allowed to go on the race track  
- 
-**Q: our battery is not arrived yet, can we queue for the inspection without it and install it as soon as it  
-arrives?​**\\ ​ 
-A: Yes, but as soon as they will be at the front of the queue and the battery is not arrived, they have to let  
-go others before ​ 
- 
-**Q: do we need a red light starter?​**\\ ​ 
-A: yes  
- 
-**Q: Do we have to wear the yellow wests for the inspection? who has to wear it (driver, manager)?​**\\ ​ 
-A: No 
- 
-**Q: Is there a buggy tour for the drivers to see the track? When? Where?​**\\ ​ 
-A: No  
- 
-**Q: Can we have a little bit of fuel to test the engine?​**\\ ​ 
-A: Go to fuel station at Technical Inspection ​ 
- 
-**Q: How long is the Technical Inspection open?​**\\ ​ 
-A: Read in Handbook, check with Tech. Team Manager ​ 
- 
-**Q: What happens with the cars at inspection or in the queue when the Technical Inspection is closing?​**\\ ​ 
-A: Team number will be noted, come back next morning and inspection will go ahead 
- 
-**Q: Information about schedule, showers, infos, eating**\\ ​ 
-A: Pit-Stop 
- 
-**Q: Where is the mechanical workshop?​**\\ ​ 
-A: Pit-Stop 
- 
-**Q: Will the data from the telemetry system be available to us?​**\\ ​ 
-A: Yes, teams receive an URL after the End of the event 
- 
-**Q: I have lost my pre-event documents, how to geht them?​**\\ ​ 
-A: QR-Codes 
- 
-**Q: Can we install a separate battery just for the telemtry system?​**\\ ​ 
-A: Check Shell rules and regulations 
- 
-**Q: Where to get the sticker that allows us to enter the trials?​**\\ ​ 
-A: Tech Registration,​ Gille/​Marielles Teams 
- 
-**Q: Can we go to trial races without the telemetry system?​**\\ ​ 
-A: No 
- 
-**Q: How to install the relais / kill switch?​**\\ ​ 
-A: Check Pre-Event Guide, Quickstart Guide 
- 
-**Q: Where to place the Joulemeter in ICE vehicles?​**\\ ​ 
-A: Close to battery, approx. 20-30cm 
- 
-**Q: Where to place the fuse in ICE vehicles?​**\\ ​ 
-A: After the Joulemeter (Battery --> JM --> Fuse) 
- 
- 
-~~DISCUSSION~~ 
faq/faq.1520298082.txt.gz · Last modified: 2018/03/06 01:01 by Corina Steffen